Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 102
ATLAS 800 Series System Manual Modules Menu Descriptions
Slt
7. MODULES MENU DESCRIPTIONS
Write security: 3; Read security: 5
The MODULES menu provides status information and menu options that allow you to configure and control
the installed option modules, as well as the network ports (see Figure 1).
Figure 8. Modules Menu
Slt
Read security: 5
ATLAS 830
Displays the eight module slots and the system controller slot (which includes the two built-in T1/PRI
ports located on the rear panel).
ATLAS 890
Display the four types of slots: system controller, option module, option module or power supply, and
power supply only.
• The two controller slots are designated SCUA and SCUB for system controller units A and B.
• The 13 option module slots are designated 1 through 13.
• The three hybrid option module or power supply slots are designated 14 through 16.
• Slot 17 is used for power supplies only.
If you install a module in a slot, then want to install a different type of module in the slot,
you must set this field to Empty before selecting another module type.
If a module is installed, the module type automatically shows the name of the installed
module, and it cannot be set to any other option.