Instruction manual

61200780L1-1C © 2004 ADTRAN, Inc. 100
ATLAS 800 Series System Manual System Utility Menu Descriptions
Telnet Client
Telnet Client
Write security: 5; Read security: 5
Allows a user to open a Telnet session to any device listed in the ATLAS 800 Series route table.
Address. Defines the IP address assigned to the remote unit you are trying to connect to.
Escape Char Defines the Telnet client escape character. Typing the combination characters
will close the active telnet session to the remote unit specified in the
ADDRESS
field.
Port Defines the IP port used in the remote login session. Default (for Telnet) is 23
Connect Activator used to start a Telnet session to the remote unit configured in the
ADDRESS field.
Client Status
Write security: 5; Read security: 5
Displays status from current Telnet client sessions.
User Name In an active Telnet client session, displays the username (from access passwords
list).
Session ID Displays the remote units IP address followed by the IP port of an active Telnet
client session (in the format
IP.IP.IP.IP:PORT).
Control Switch Schedule (ATLAS 890)
Write security: 5; Read security: 5
Specifies when a controller switch from active to standby will occur.
Option Keystroke
^ ] <Ctrl > + ]
^ \ <Ctrl > + \
^ [ <Ctrl > + [
^ ^ <Ctrl > + <Shift > + 6
^ _ <Ctrl > + <Shift > + -
Controller Switch
Immediate
A forced controller switch will occur immediately.
Controller Switch at
Time
Controller switch will occur at the specified date and time. When this option is
selected, a new field called CTRL S
WITCH DATE AND TIME will be displayed
below the current field.