User manual

Table of Contents
i
1
Introduction to the HSSI-10/100 RIOP 2
Chapter 1 - Network Installation 3
Connecting the HSSI-10/100 to the Ethernet 3
Connecting the HSSI-10/100 to a T3 Line Communications Device 3
Connecting a Management Console 4
Powering Up the Router 4
Chapter 2 - Quickstart Configuration 5
ETHERNET INTERFACE CONFIGURATION 5
IP Protocol 5
Required for IP 5
Suggested for IP 6
IPX Protocol 6
Required for IPX 6
Suggested for IPX 6
AppleTalk Protocol 6
Required for AppleTalk 6
Suggested for AppleTalk 6
DECnet Protocol 6
Required for DECnet 6
Suggested for DECnet 7
WAN INTERFACE CONFIGURATION 7
Physical Communications Settings 7
Required for Dedicated Line Operation 7
Suggested for Dedicated Line Operation 7
PPP Configuration 7
Link Configuration 7
Required for Dedicated Line Operation 7
Suggested for Dedicated Line Operation 7
IP Protocol 7
Required for IP 7
Suggested for IP 7
IPX Protocol 8
Required for IPX 8
AppleTalk Protocol 8
Required for AppleTalk 8
DECnet Protocol 8
Required for DECnet 8
Frame Relay Configuration 9
Link Configuration 9
Required for Dedicated Line Operation 9
Suggested for Dedicated Line Operation 9
Frame Relay DLCI Mappings 9