Manual

Parallel
Make sure that the Flybar ControlArms and Paddles are in line as shown in the diagram.
Horizontal
Horizontal
Attention:
WashoutArm
Horizontal
06 0501SwashplateTool-
Swashplate
Horizontal
0 Pitch°
MixingArm
5
°
A
Turn on the Transmitter, set the Throttle Stick into center position for 0 ° Pitch. Use the Subtrim menu to
adjust the 3 Swash ServoArms to level.
B
To do all Basic Setups first UNPLUG
ESC from the receiver then use a 4.8V
Receiver Battery for the setup.
Level the Swashplate by adjusting the links from the ServoArms to the Swashplate. Use a
Compass Swashplate Tool as guide.Then set level the WashoutArms.
C
By adjusting the Links between Swashplate and MixingArms set the MixingArms to a 5° downward position.
Adjust the Links between the MixingArms and the Main Blade Holder to set the Main Blade Pitch to 0°.
D