User's Manual

The specifications are subject to change without notice. 11 of 14
English
Model: GT701 Version: 1.0
each for several times depend on GSM received state. The GT701 will check the phone
book name for about 60~80 seconds when the SYS LED (blue) turns on. If there is no data
on SIM card, the lights of GPS, SYS & Power LED will flash simultaneously.
If so, presses and holds the “SOS” button for few seconds until all lights of GPS, SYS &
Power LED dying out. Then the GT701 will generate the phone book name of T1, T2, T3
and INTERVAL (as below list) which parameter is default setting.
5. To modify phone book
To modify the contents of the phone book of SIM card, please contact to your service
provider.
(To avoiding GT701 can not use abroad, add the country code when modify the phone
number.)
6. Phone Book specification
The phone book name table as:
Phone Book Name Function
T1
When T1 call in GT701 which will hang up automatically and send a
position info, default is 9999
T2
When T2 call in GT701 which will hang up automatically and send a
position info. default is 9999
T3
When T3 call in GT701 which will hang up automatically and send a
position info. default is 9999
INTERVAL
Setting regular report, default is 0000, setting for a unit of a second.
7. To set Geo-Fence Notification
All of T1~T3 users can set the function via the service provider’s platform. The service
provider will send commands to the GT701 via GPRS when user notices. If the setting was
successful the GT701 will send the ack message to setting user and the user can check
correct or not through the map.
8. Report rate setting
The phone book name is INTERVAL, default is 0000, setting for a unit of a second. The