User guide

2. Periodic Disaster Recovery Testing follows that cleanup. For more information,
see:
v Chapter 4, “DR Test, Verify, Report, Cleanup, and Recover Cycle,” on page 23
3. As required: Perform a Failback.
Recovering a Server Group
Servers that are grouped can be recovered as a group.
Before you begin
v Review information about creating a group.
v Recovery follows successful testing, test reporting, verification, and cleanup. See
Chapter 4, “DR Test, Verify, Report, Cleanup, and Recover Cycle,” on page 23.
Procedure
1. Select the group targeted for recovery in the tree view on the main site
window.
2. Click the Group Recovery button on the main site window. See Figure 28.
3. Recovery proceeds in a manner similar to Chapter 7, “Performing a Disaster
Recovery,” on page 33.
What to do next
1. Manual cleanup of the system following a VSR Disaster Recovery is imperative
and requires working with the IBM VSR Administrator.
2. Periodic Disaster Recovery Testing follows cleanup.
3. As required: Perform a Failback.
Recovering a Reserved Resource Virtual Machine Service Level
System
Server recovery at the Reserved Resource Virtual Machine service level is
accomplished as follows:
v Recovering a Reserved Resource Server
Figure 28. Server Group, Group Recovery
38 IBM SmartCloud Virtualized Server Recovery: Customer User Guide