User guide

7. When the VSR Replication Client completes the recovery, the following screen
displays:
Essentially, the same following screen displays for Linux systems when the VSR
Replication Client completes the recovery.
When you see this screen, the VSR Replication Client is finished creating your
server as a virtual machine in the VSR environment. It is also having the
network settings applied for you to be able to connect to it. You can
approximate the length of time it takes until you can access this server, just as
you would access your live server. That is, the approximate length of time it
takes for the server to fully boot.
8. Click the View Recovery Completion Instructions link on the finished
Recovery Process page. This action displays the instructions for manual
operations necessary to complete the recovery process.
Note: All recoveries are audited in the VSR database. A report on the
frequency of recoveries for each server is available to the Customer VSR
Administrator in the Reports section of the VSR Portal. User access to this
feature is enabled by the Customer VSR Administrator.
What to do next
1. Manual cleanup of the system following a VSR Disaster Recovery is imperative
and requires working with the IBM VSR Administrator.
Figure 26. Live Server Recovery, Completed
Figure 27. Live Server Recovery, Linux Completed
Chapter 7. Performing a Disaster Recovery 37