User guide

3. Complete the filter, as required.
For each site listed in detail, a combination of either of the following mutually
exclusive text statement types appear, as warranted.
When Live Recovery is possible... When Live Recovery is not possible...
v Site can always perform Live
Recoveries
v Site can always perform DR Testing
v Live Recoveries are currently enabled
for this site, window closes
DD/MM/YYYY.
v DR Testing is currently enabled for
this site window closes
DD/MM/YYYY.
v Live Recoveries are currently disabled for this
site
v DR Testing is currently disabled for this site
The default settings for the Site: and System Type: fields are All Sites for My
User Account and All Types, respectively. The servers are arranged in groups for
selection below the filter area. To customize the filter settings:
v Click the down arrow associated with the Site: field and select the site to
which the server you plan to recover belongs.
v Click the down arrow associated with the System Type: field and select the
system type of the server you plan to recover.
v Click the Apply Filter button.
The servers are presented for selection as filtered in groups below the filter
area.
4. Click the check boxes corresponding with each server that you want to recover.
Note:
v The gold server icon (
) in the tree view indicates a server protected at the
Reserved Resource Virtual Machine service level.
Figure 22. Live Server Recovery
34 IBM SmartCloud Virtualized Server Recovery: Customer User Guide