User`s guide

3–Configuring Fibre Channel
Troubleshooting
3-16 FC0054609-00 B
Refer to the topic about performing diagnostics in the QConvergeConsole Help
System for more information.
Fibre Channel Diagnostics Using the Interactive QCC CLI
To run the loopback test, read/write buffer test, or beacon test:
1. On the Main Menu, select 4: Adapter Diagnostics.
2. On the Fibre Channel Diagnostics menu, select 1: Loopback Test to run
the loopback test, select 2: Read Write Buffer Test to run the read/write
buffer test, or select 3: Beacon Test to run the beacon test. Select 4:
Transceiver Diagnostics Monitoring Interface (DMI) to view the
transceiver diagnostics information.
Refer to the section about Fibre Channel interactive commands in the
QConvergeConsole CLI User’s Guide for information.
Fibre Channel Diagnostics Using the Noninteractive QCC CLI
Refer to the section about the Fibre Channel noninteractive commands in the
QConvergeConsole CLI User’s Guide for information.