User`s guide

3–Configuring Fibre Channel
Driver Parameters
3-12 FC0054609-00 B
5. Use the slider to select a low, medium, or high priority, as shown in
Figure 3-4.
Figure 3-4. Setting the QoS by Priority
6. Click Save.
Driver Parameters
Configuring Fibre Channel Driver Parameters with the QCC
GUI
Refer to the topics about HBA parameters and viewing or modifying port
parameters in the QConvergeConsole Help System for information.
Configuring Fibre Channel Driver Parameters with the
Interactive QCC CLI
To configure Fibre Channel driver parameters using the interactive QCC
CLI:
1. On the Fibre Channel Adapter Configuration menu, select HBA
Parameters.
2. On the port menu, select a port to open the HBA Parameters menu.
Phy QLE2672 0:
Virt QLE2672 0:
Virt QLE2672 1: