User`s guide

3–Configuring Fibre Channel
Virtual Ports (NPIV)
3-10 FC0054609-00 B
6. Use the slider to select the percentage, as shown in Figure 3-2.
Select between 1 percent to 100 percent to set the bandwidth you want to
guarantee for data transferred over the selected virtual port.
Figure 3-2. Setting the QoS by Bandwidth Percentage
7. Click Save.
To set the QoS by bandwidth speed:
1. Expand a 2600 Series Adapter in the QConvergeConsole system tree.
2. Select a virtual port.
3. Select the QoS tab.
4. On the QoS Type menu, select Bandwidth.
5. On the View By menu, select Bandwidth Speed.
Phy QLE2672 0:
Virt QLE2672 0:
Virt QLE2672 1: