User`s guide

2–Installing Software and Initial Setup
Multi-boot Image for Fibre Channel Adapter Function Configuration Utility
FC0054609-00 B 2-13
Running Diagnostic Commands
Table 2-5 describes the diagnostic commands.
Using UEFI for Custom Configuration
Refer to the relevant server vendor documentation for details.
Table 2-5. Diagnostic Commands (Oracle SPARC)
Command Description
version This command lists the FCode version.
beacon This command flashes an adapter’s LED.
selftest This command tests the adapter’s memory and loopback.
ext-loopback-test This command tests the external loopback.
show-children This command lists all attached targets.
disk-test This command tests a selected target.
sel-dev This command selects a device for disk test.
sel-lun This command selects the LUN number for disk test.