User`s guide

User’s Guide—Fibre Channel Adapter
2600 Series
FC0054609-00 B Page iii
Revised the procedure and revised the note. “Updating the Multi-boot Code” on page 2-2
Revised the section. “QLflash Command Line Options” on page 2-3
Revised the section. “Fibre Channel Adapter Function Configuration
Utility” on page 2-3
Revised the note and the first paragraph of the
section. Added “Personality” to the list of options.
“Using Fast!UTIL for Custom Configuration” on
page 2-3
Added more information about the Connection
Options setting.
“Adapter Settings” on page 2-4
Revised Step 6. Added information about booting
from a SAN to the note.
“Selectable Boot Settings” on page 2-5
Corrected the description of the Interrupt Delay
Timer setting.
“Advanced Adapter Settings” on page 2-7
Added. “Personality” on page 2-10
Added. “Using FCode for Custom Configuration (Oracle
SPARC)” on page 2-10
Added. “Using UEFI for Custom Configuration” on
page 2-13
Added a note at the beginning of the section.
Revised the section (and subsections) to refer to
ESX/ESXi 4.x and 5.x.
“Installing Fibre Channel in VMware ESX/ESXi” on
page 3-2
Added. “Installing Fibre Channel in Solaris” on page 3-3
Revised the note at the beginning of the section. “Target Persistent Binding” on page 3-4
Updated Figure 3-2 and Figure 3-3. “Setting QoS by Bandwidth” on page 3-9
Updated Figure 3-4. “Setting QoS by Priority” on page 3-11
Revised the section to refer to the QLogic QCon-
vergeConsole Plug-in for VMware vCenter Server
User’s Guide.
“Configuring Fibre Channel Driver Parameters with
the QLogic QConvergeConsole Plug-in for
VMware vCenter Server” on page 3-13
Added. “Personality Configuration” on page 3-15
Added text and Figure A-1 to show the location of
each LED. Corrected the title of Table A-1.
Appendix A
Revised. Glossary
Added. Index