User`s guide

2–Installing Software and Initial Setup
Multi-boot Image for Fibre Channel Adapter Function Configuration Utility
FC0054609-00 B 2-3
2. Boot to DOS.
3. Run the update script at the command prompt:
C:\>update.bat
This script program updates the multi-boot image on the adapter.
4. Reboot the system.
QLflash Command Line Options
When you are running QLflash.exe, type /? for help.
Fibre Channel Adapter Function Configuration Utility
This section provides detailed configuration information for advanced users who
want to customize the configuration of the 2600 Series Adapter and the connected
devices. You can configure the 2600 Series Adapter using Fast!UTIL, FCode, or
UEFI:
 Use Fast!UTIL in a pre-OS environment.
 Use FCode for Oracle SPARC
®
systems.
 Use UEFI for Dell
®
, IBM
®
, and Oracle x64 OEM adapters (where the platform
supports UEFI).
Using Fast!UTIL for Custom Configuration
To acc ess Fast!UTIL, press ALT+Q or CTRL+Q during the Host Bus Adapter
BIOS initialization (it may take a few seconds for the Fast!UTIL menu to appear).
When the Select Host Adapter window appears, select the adapter type to
continue to the Adapter Settings window. After you have selected the adapter
settings, a window appears indicating that the configuration settings have been
modified. After you click Save changes, Fast!UTIL reboots your system to load
the new parameters.
NOTE
You can also use QCC GUI/CLI plug-in to update the multi-boot image,
depending on the OS.
NOTE
The Fast!UTIL BIOS utility does not run on Oracle SPARC systems.
CAUTION
If the configuration settings are incorrect, your 2600 Series Adapter may not
function properly.