User`s guide

2–Installing Software and Initial Setup
Multi-boot Image for Fibre Channel Adapter Function Configuration Utility
2-2 FC0054609-00 B
Multi-boot Image for Fibre Channel Adapter
Function Configuration Utility
This section contains the following information:
 Multi-boot Package Contents
 Fibre Channel Adapter Function Configuration Utility Package Contents
 Using QLflash
 Fibre Channel Adapter Function Configuration Utility
Multi-boot Package Contents
The multi-boot package for 2600 Series Adapters is a compressed file that
contains the Host Bus Adapter BIOS, unified extensible firmware interface (UEFI)
code, and firmware. This package also includes the QLflash utility.
Fibre Channel Adapter Function Configuration Utility
Package Contents
The following files are included for updating the adapter multi-boot code:
 update.bat—DOS batch file that calls the executable files to update the
adapter multi-boot
 QLflash.exe—Utility to update the multi-boot code and firmware
 DOS4GW.exe—File required to use the QLflash.exe
 hldyyyyyy.bin—Combined binary file, which includes the binaries for the
BIOS, UEFI, and firmware
Using QLflash
QLflash is a native DOS utility. Refer to the Readme file for more information. To
run this utility, boot to a DOS hard drive or a USB removable drive.
Utility version:
/VER = Display version of the QLflash utility
Help options:
/? = Help menu
Updating the Multi-boot Code
To write the multi-boot code to Flash memory:
1. Insert the 2600 Series Adapter in the system.
a. Create a DOS bootable USB.
b. Copy the extracted multi-boot code.