User`s guide

FC0054609-00 B xvii
Quick Start
Installation Instructions
This Quick Start section describes how to install and configure your new 2600
Series Adapter in three simple steps:
 Step 1. Install the Adapter Hardware
 Step 2. Install the Adapter Drivers
 Step 3. Install QConvergeConsole
Step 1. Install the Adapter Hardware
To install the adapter hardware, you need to open the computer and locate the
appropriate bus slot. If necessary, consult your computer system manual for
instructions on how to remove the computer cover.
To install the adapter hardware:
1. Power off the computer and all attached devices such as monitors, printers,
and external components.
2. Disconnect the power cable.
3. Remove the computer cover and find an empty PCIe
®
8 (or larger) bus slot.
4. Pull out the slot cover (if any) by removing the screw or releasing the lever.
5. Install the low-profile bracket (if required).