Product Label

6 7
Bees, Wasps, Hornets, and Yellow Jackets Indoor Treatment
Apply a 0.06% emulsion of this product. For best results, apply in the late evening when
pests are at rest. Ensure that sprays contact the pests and reach areas where pests breed
such as under rafters in attics. Make a second application if pest pressure is high or if insects
reappear.
Important: Before application of this product, locate all heat pipes, ducts, water and sewer
lines and electrical conduits so that they can be avoided during application to prevent dam
-
age. Applications must not be made directly into electrical xtures, sockets, or switches.
Cover all home food processing surfaces and utensils during treatment or wash them
thoroughly prior to using again. Do not treat unless all birds and pets are removed prior to
treatment. Aquariums must be covered before spraying. Do not permit humans or pets to
contact treated surfaces until the spray has dried.
When treating poorly ventilated or overhead areas, wear unvented goggles, gloves and a
respirator. Avoid touching sprayed surfaces until spray has completely dried.
Do not use in food/feed areas of food/feed handling establishments, restaurants or other
areas where food/feed is commercially prepared or processed. Do not use in serving areas
while food is exposed or facility is in operation. Serving areas are areas where prepared
foods are served such as dining rooms but excluding areas where food may be prepared or
held. Non-food/feed handling establishments are areas such as garbage rooms, lavatories,
oor drains (to sewers) entries and vestibules, ofces, locker rooms, machine rooms, boiler
rooms, garages, mop closets and storage (after bottling or canning).
Outside of Structures
This product can be used around wood to control wood-infesting insects and other pests.
Make applications with a 0.6% emulsion with a fan spray at a maximum of 25 psi to run-off.
If pests are found inside fence posts, trees or utility poles, locate the area of infestation
by drilling. Inject a 0.6% emulsion. For treating bees, hornets, wasps, and yellow jackets,
direct contact works best; apply in the late evening when pests are at rest. For best results,
apply a saturated spray solution directly into the nest in the ground or in bushes, or in crack
and crevice areas.
Pests Under Slabs
To control Ants, Cockroaches and Scorpions which live under slab areas, drill and inject
0.06% to 0.12% emulsion per 10 square feet or 2 gallons of emulsion per 10 linear feet. One
gallon of emulsion should be used. Application may also be made by horizontal rodding and
then injection of 1 gallon of this emulsion.
How to Calculate the Active Ingredient Content of the Finished Spray Mixture
Use the following equation to calculate the percent active ingredient that is in the spray tank
after mixing this product:
(7.9) X (Fl. Oz of this product added to the tank)
=
Percent Active Ingredient
of spray mix
(Gallons of nished spray mix) X (128)