Product Label

2 3
PESTS CONTROLLED RATE
• Ants
• Bees
• Beetles
• Boxelder Bugs
• Centipedes
• Cockroaches
• Crickets
• Earwigs
• Firebrats
• Flies
• Millipedes
• Pillbugs
• Scorpions
• Silversh
• Sowbugs
• Spiders
• Ticks
• Wasps
0.02 – 0.06% suspension
(0.33 – 1 . oz/gallon water)
REMARKS
For residual control of the listed pests in buildings, structures, and on modes of
transport, apply as a crack and crevice, pinstream, spot, coarse, low pressure spray
(25 psi or less), or with a paint brush. Do not use as a space spray, or as a broadcast
application to interior surfaces of homes.
Apply to areas where pests hide, paying special attention to cracks and crevices.
Apply to baseboards, corners, storage areas, closets, around water pipes, doors
and windows, in attics and eaves, behind and under refrigerators, cabinets, sinks,
furnaces, stoves, under shelves, drawers and similar areas.
Cockroaches, Crickets, Firebrats, Scorpions, Silversh, Spiders, and Ticks:
Apply as a coarse, low pressure spray to areas where these pests hide.
Ants: Apply to trails, around doors and windows and other places where ants may
be found.
Bees and Wasps: Apply to nests late in the evening when insects are at rest. Thor
-
oughly spray nest as well as its entrance and surrounding areas where insects alight.
Boxelder Bugs, Centipedes, Earwigs, Beetles, Millipedes, Pillbugs, and Sow
-
bugs: Apply around doors and windows and other places where these pests may be
found or where they may enter premises. Also spray baseboards and storage areas.
Mixing Directions: See mixing directions in “Pest Control on Outside Surfaces and Around
Buildings” section.
Dilute this product with water for spray or brush application. First ll the sprayer with the de
-
sired volume of water and then add this product. Before spraying, close and shake sprayer
to insure proper mixing. Prepare only the amount of solution needed for the application. If
pest pressure is high, the area may need to be retreated to ensure and/or maintain control.
Reapply only if there are signs of renewed insect activity, and do not reapply more than
once a week (7 days).
FOOD/FEED HANDLING ESTABLISHMENT APPLICATIONS
Applications of this product are permitted in food/feed and non-food/feed areas of food/
feed handling establishments as a general surface, spot treatment, or crack and crevice
treatment.
Food/feed handling establishments are any place other than private residences where food/
feed is held, processed, prepared or served. Included are areas for receiving, storing, pack
-
ing (canning, wrapping, bottling, boxing), and preparing of food/feed. These also include
areas of edible waste storage and enclosed processing systems (dairies, mills, edible oils,
syrups). Serving areas where food is exposed and the facility is in operation are also con
-
sidered food areas.
Permitted nonfood/feed areas are areas such as garbage rooms, lavatories, oor
drains (to sewers), entries and vestibules, ofces, locker rooms, machine rooms, ga
-
rages, mop closets and storage (after canning or bottling). All areas where insects hide
or through which insects may enter should be treated.
Permitted use sites include, but are not limited to: Aircraft (Do not use in aircraft cabins),
apartment buildings, bakeries, bottling facilities, breweries, buses, cafeterias, candy plants,