Product Label

16
COMPARE-N-SAVE INDOOR/OUTDOOR INSECT CONCENTRATE
OUTSIDE SURFACES APPLICATION DILUTION CHART
Concentration of Active Ingredient Dilution Rate
0.02% 0.33 . oz. per 1 gal. water
0.06% 1.0 . oz. per 1 gal. water
Follow the application instructions in the table below to control target pests.
COMPARE-N-SAVE INDOOR/OUTDOOR INSECT CONCENTRATE
OUTSIDE SURFACES APPLICATION INSTRUCTIONS
PESTS CONTROLLED
• Ants
• Carpenter Ants
• Fire Ants
• Armyworms
• Bees
• Beetles
†
• Biting Flies
• Boxelder Bugs
• Centipedes
• Chiggers
• Chinch Bugs
• Clover Mites
• Crickets
• Cutworms
• Dichondra Flea
Beetles
• Earwigs
• Elm Leaf
Beetles
• Firebrats
• Fleas
• Flies
• Grasshoppers
• Hornets
• Japanese
Beetles
†
• Millipedes
• Moths
• Roaches
(including
Cockroaches)
• Scorpions
• Silversh
• Sod Webworms
• Sowbugs
(Pillbugs)
• Spiders
(including
Black Widow
Spiders)
• Springtails
• Ticks (including
Brown Dog
Ticks)
• Wasps
†
Not for use in California
SPECIFIC APPLICATION INSTRUCTIONS
Use a 0.02 to 0.06% emulsion as a residual spray in a spray volume of up to 10 gallons
of emulsion per 1,000 square feet. For thorough coverage of plants with dense foliage,
use the higher application volume.
The higher rate should be used for heavy pest infestation, quicker knockdown or longer
residual control.
Repeat applications at no more than once every seven days under severe insect infes
-
tation or if insects return.
Barrier Treatment: To prevent infestation of buildings, apply to a band of soil and veg
-
etation 6 to 10 feet wide around and adjacent to the building. Apply from the base of the
foundation to 2-3 feet above the foundation. Use dilutions of 0.33 to 1.0 uid oz. of this
product per 1,000 square feet in sufcient water to provide adequate coverage (refer to
Perimeter Application Dilution Chart).
• Ants and Fire Ant Mounds
SPECIFIC APPLICATION INSTRUCTIONS
Use this product at a dilution of 0.06% emulsion.
Apply using the Drench Method by applying 1 to 2 gal. of nished spray to each mound
area by sprinkling the mound until it is wet. Treat a four-foot diameter circle around the
mound. If the mound diameter is greater than one foot, use the higher volume. Optimum
results are achieved if applications are made during cool hours of the day.
• Mosquitoes
SPECIFIC APPLICATION INSTRUCTIONS
Use a dilution rate of 0.33 to 1.0 uid oz. of this product per gallon of water. Apply one
gallon of emulsion per 1,000 square feet to treat around landscapes, lawn and buildings.
If applications at higher volume are required, dilute this product at lower concentrations
and apply at greater volumes to deliver the desired amount of product per area (refer to
the Ornamental or Perimeter Application Dilution Charts).