Technical data

Operating syste
msupport
Table 1 lists th
e system features and requirements for Secure Path 3.0F SP3 for Active-Passive disk arrays.
For additional support information, g o to the HP web site h
ttp://www.hp.com/support.
Table 1 Secure Path 3.0F SP3 for Active-Passive disk arrays system features and
requirements
System feature
Requirement
HP-UX version
HP-UX 11i (v1.0, v2.0) 64-bit
HP-UX 11i (v1.0) 32-bit
HP-UX server system types
A-class: rp24xx
K-class (64-bit only): Kx60, Kx70, Kx80
L-class: rp54xx
N-class: N4000, rp74xx
V-class: V2200, V2250, V2500, V2600
rp3440, rp4440, rp7410, rp74 20, rp8400
rx1600, rx2600, rx4640, rx5670, rx7650, rx8620
zx2000, zx6000
Superdome, Superdome Integrity
File systems
HFS (UFS)
JFS (VxFS)
Controllers
Dual HSV100 controllers running VCS 3.010 or later
Dual HSV110 controllers running VCS 3.010 or later
Dual HSVX700 controllers
SCSI modes SCSI-2 with or without CCL
SCSI-3 with CCL
Volume managers
HP Logical Vo
lume Manager (LVM) or
Veritas Volu
me Manager (VxVM)
Clustering
HP MC/ServiceGuard 11.15 or later
Fibre Channel mode Switched fabric
NOTE:
Secure Path 3.0F SP3 supports the Fibre Channel switches and firmware listed in the
HP StorageWorks
SAN design reference guide
at htt p://h18006.www1.hp.com/products/storageworks/san/
documentation.html.
Table 2 lists the supported devices and driver requirements for this release and earlier releases of Secure
Path for Active-Passive disk arrays.
HPStorageWorksSecurePath3.0FServicePack3forHP-UX11iv1.0and11iv2.0
5