Technical data

• An issue which could, under certain instances, when the proactive path polling and Lun Collision
occurs simultaneously on the same logical unit causing system panic has been addressed in
this release.
• Earlier Se cure Path releases reported PPM Path Failing message as a debug log m essage. This
syslog message has been modified to be more informative in this release.
• An issue where upgrade installation had problems, since installation was done without p roper
removal of the product h as been addressed in this release.
Operating system suppor t
Table 5 lists the system features and requirements for Se cure Path 3.0F SP3 for Active-Active disk arrays.
For additional support information, g o to the HP web site h
ttp://www.hp.com/support.
Table 5 Secure Path 3.0F SP3 for Active -Active disk arrays system features and
requirement
s
System feature Requirement
HP-UX versi
on
HP-UX 11i v1.0 (64–bit)
HP-UX 11i v2.0
HP-UX server system types
A-class: rp24xx
K-class (64-bit only): Kx60, Kx70, Kx80
L-class: rp54xx
N-class: N4000, rp74xx
V-class: V2200, V2250, V2500, V2600
rp7410, rp8400
rx1600, rx2600, rx4640, rx5670, rx7650, rx8620
zx2000, zx6000
Superdome, Superdome Integrity
File systems
HFS (UFS)
JFS (VxFS)
Fibre Channel host bus adapters (HBAs)
HP A6826A
HP A9782A
HP A9784A
H P A 5158 A
HP A6795A
HP A6685A (K-class server only)
HP AB378A
HP AB379A
Volume managers
HP Logical Volume Manager (LV M ) or
Veritas Volume Manager (VxVM)
Clustering
HP MC/ServiceGuard A11.15 or later
Fibre Channel mode Switched Fabric and Arbitrated Loop
Table 6 lists the supported devices and driver requirements for this release and earlier releases of Secure
Path 3.0F SP3 for Active-Active disk a rrays.
HPStorageWorksSecurePath3.0FServicePack3forHP-UX11iv1.0and11iv2.0
17