User`s guide

1–2 Getting Started
Hardware and Software Setup
1. Place the notebook on a flat surface near an electrical outlet,
then connect the notebook to external AC power.
Plug the AC adapter cable into the DC power connector 1.
Plug the power cord into the AC adapter 2 and into an
electrical outlet 3. (Power cords and outlets vary by country.)
Connecting the notebook to external power
2. Open the notebook by sliding the display release latch to the
right 1 and raising the display 2.
Opening the notebook
316625-001.book Page 2 Thursday, December 12, 2002 9:01 AM