Installation guide
■
You are upgrading to the Solaris 10 5/08 software from the following releases:
■
Solaris 9 release
■
Solaris 10 release
For example, if you run the following command, the progress bar should be displayed after you
see the following output:
Running installer on BE s10u1.
However, the bar fails to appear.
# luupgrade -i -n s10u1 -s /net/installsrv/export/s10u1
-O "-nodisplay -noconsole"
Validating the contents of the media /net/installsvr/export/s10u1.
The media is a standard Solaris media.
The media contains a standard Solaris installer.
The media contains Solaris 3 version 10.
Mounting BE s10u1.
Running installer on BE s10u1.
No error message is displayed.
Workaround: Use the prstat command. This command enables you to watch the progress
while packages are being added during the installation.
SPARC: Upgrading From Solaris 9 Releases With
Recommended Patch Cluster Partially Succeeds
(6202868)
For a system that is running a Solaris 9 release with the recommended patch cluster installed,
upgrading to Solaris 10 OS only partially succeeds. This problem aects systems that are
running the following releases with the Solaris 9 recommended patch cluster installed.
■
Solaris 9 release
■
Solaris 9 9/02 release
■
Solaris 9 12/02 release
■
Solaris 9 4/03 release
■
Solaris 9 8/03 release
■
Solaris 9 12/03 release
■
Solaris 9 4/04 release
When you upgrade to the Solaris 10 release, the SUNWcti2x package is not successfully
removed from the system.
Upgrade Issues and Bugs
Solaris 10 5/08 Release Notes • April 200846