Installation guide

Or:
Warning: 1 sector(s) in last cylinder unallocated
The warning occurs when the size of the le system that you created does not equal the space on
the disk that is being used. This discrepancy can result in unused space on the disk that is not
incorporated into the indicated le system. This unused space is not available for use by other
le systems.
Workaround: Ignore the warning message.
Upgrade Issues and Bugs
Note – For the latest information about upgrade support beginning with the Solaris 10 5/08
release, see “Changes in Upgrade Support for Solaris Releases” on page 17.
This section describes upgrade bugs. Some might occur while you are upgrading to Solaris 10
OS. Others might occur after you have completed upgrading.
lucreate and lumake Commands Fail on Non-Global
Zones (6659451)
When the lucreate and lumake commands are used on non-global zones which are not in the
running state, the commands might not execute successfully. The contents of the original
non-global zone and the copy might dier. Users might be unable to log in to the zone's console
using the zlogin command. The following error message is displayed while using the zlogin
command:
zlogin: makeutx failed
The diagnostic output of the lucreate and lumake commands do not display any errors.
Workaround: Ensure that all non-global zones are in the running state before using the
lucreate and lumake commands.
Upgrade Issues and Bugs
Chapter 1 • Installation Issues 39