User`s guide

DS-KZCCA-DB Installation Procedure

Use this installation procedure if your system type is VAX™4000-108,

MicroVAX™3100-88 or MicroVAX™-98.

Removing System Cover

After the system has been shut down, and power has been removed from the

system, remove the system cover by releasing the retaining screws.

Locate the I/O option slots, and remove one of the blank I/O panels. Consult

your system documentation for more information regarding accessing the

system internals.

Removing Enclosure Access Cover

Figure 13: Accessing the I/O slots

Note: To avoid damage from static discharge, before removing the

system cover, touch a metal part of the enclosure. It is

recommended that you wear an antistatic wrist strap and use and

antistatic mat when adding options inside the system unit.