Installation guide

In Tru64 UNIX, the user access configuration file is located in
/usr/share/sysman/web/im/webagent/WEBAGENT.INI.Ina
dataless environment, you will need to copy that file to the local directory
/var/im/webagent if you need to change its configuration setting.
4.3.9.6 Known Problems
The following problems exist in current version of the Insight Manager:
• Contrary to the message presented on the initial web page
(http://machine:2301), this version of Insight Manager does not
generate traps. Thus, alerts are not generated.
• The Insight Manager Device Discovery web page
(http://machine:2301/cpqdev.htm) may show inconsistent or
incorrect data on some platforms, as active discovery is not fully
functional.
• On some browsers, the login dialog box, which consists of text fields for
Name and Password, opens with the initial focus on the Password text
field.
• The information displayed in the Capacity field for disks described in the
Mass Storage web pages is calculated as blocksize * 1,000,000. This
will be changed to the defined calculation of blocksize * 1,048,576 in a
future release.
• The Insight Manager AutoRefresh option, when set for less than 60
seconds, might stop refreshing web pages when run from a NetScape
browser running on Tru64 UNIX.
• The Expansion Bus information displayed on the Insight Manager System
Information web page may be incorrect or incomplete. For example, on
systems where both ISA and PCI buses exist, only ISA is displayed.
• The Insight Manager is not supported on the DEC 7000 systems. The
cpq_mibs daemon will fail to initialize on this platform. This problem
will be fixed in the first available patch kit.
4.3.10 Startup Messages Lost in Large Configurations
On systems which display a large number of console messages at system
initialization (typically, systems configured with a large number of devices),
some of the messages may be missing from the /var/adm/messages file.
This problem can be corrected by increasing the size of the kernel’s message
buffer.
Use either of the following procedures to change the buffer size. You must
be root to make the change.
4–24 Base System Software Notes