User`s guide

DLT MiniLibrary (TL891) - User’s Guide
B-10 EK-TL891-UG. A01
B.2 Interfaces and Cabling
Cabling consists of connecting the module to the host interface and terminating
the busses properly.
Refer to Figure B-5. If the Base Module is to be installed alone, that is, not as
part of a multi-module subsystem, the connections required are the SCSI
connection or connections to the host, and the AC power connection. The Global
Control interface connector is used only when the module is used in combination
with other modules as part of a DLT MiniLibrary subsystem.
Figure B-5 Rear Panel Connectors, Terminator and Cables