User`s guide

DLT MiniLibrary (TL891) - User’s Guide
B-6 EK-TL891-UG. A01
B.1.2 Rackmounting in a StorageWorks Metric Cabinet
These procedures assume that you have already separated the slide racks and
have attached the mounting brackets to the slides as described in the beginning
of this chapter.
If you have done so, you are now ready to install the metric conversion brackets
supplied with the base module. These adapter brackets are designed to mount 4U
high (IU=1.75”) RETMA modules into a metric rack. The brackets maintain the
4U high unit-to-unit spacing on a metric rack which enables the pass-through
system to work properly.
Figure B-3 Parts List for StorageWorks Metric Rackmounting