User`s guide

Chapter 5. Diagnostics and Troubleshooting
EK–TL891–UG. A01 5–17
Figure 5–4 Diagnostic Submenu
Cartridge Cycle
Friction Test
Tach Feedback
Scanner Feedback
This screen is scrollable. The list of Diagnostics available is as follows.
• Cartridge Cycle
• Friction Test
• Tach Feedback
• Scanner Feedback
Of these selections, only Cartridge Cycle is intended for use in the field. The
remaining tests are used during factory setup.
5.4.1 Cartridge Cycle Diagnostic
When you select Cartridge Cycle, the library robotics begin to move cartridges
randomly from slot to slot in the magazine, while reporting on the front panel the
number of passes.
This diagnostic will run continuously as long as the Base Module has power. To
stop the test, press the Escape button. A flashing message appears on the display
telling you that the test is paused. Pressing the Escape button a second time
terminates the diagnostic and returns to the Maintenance Menu.