User`s guide

DLT MiniLibrary (TL891) - User’s Guide
5–16 EK–TL891–UG. A01
5.4 Using CE Diagnostics
The system diagnostics are intended for use by a CE or other technically trained
person. To use system diagnostics, proceed as follows.
1. At the
Default Screen
, press the
Enter
button. The display will show the
following.
Figure 5–2 Main Menu
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
2. Press the button twice to move the next to Maintenance, then press
the Enter button to select the Maintenance Menu. The display will show
something similar to the following.
Figure 5–3 Maintenance Submenu
Clean Drive
Diagnostic Menu
Demo Menu
Flash Update
3. Press the button once to move the next to Diagnostic Menu, then
press the Enter button to select the Diagnostic Menu. The following menu
will appear.