User`s guide

DLT MiniLibrary (TL891) - User’s Guide
4–2 EK–TL891–UG. A01
Figure 4–1 Default Screen
2. At the Default Screen, press the
Enter
button. The display will show the
Main Menu, as in Figure 4-2.
Figure 4–2 Main Menu
3. Press the button three times to move the to
Configure Menu, then
press the Enter button. The display will show the Configure submenu, as
shown in Figure 4-3. The
at the end of the fourth line means that there are
additional configuration options that can be reached by scrolling with the
button.
Figure 4–3 Configure Submenu
DLT0 Active
DLT1 Idle
Loader Idle
0 1 2 _ 4 _ 6 7 8 9
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
Set Data Format
Set SCSI
Set Library Mode
Set Element Base