User`s guide

Chapter3. Regular Maintenance
EK–TL891–UG. A01 3–-3
Figure 3–1 Main Menu
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
2. Press the button twice to move the next to Maintenance, then
press the Enter button to select the Maintenance Menu. The display
will show something similar to the following.
Figure 3–2 Maintenance Submenu
Clean Drive
Diagnostic Menu
Demo Menu
Flash Update
3. Press the Enter button once to select Clean Drive. The following
screen appears.
Figure 3–3 Cleaning Submenu
Cleaning:
*
DLT0
Using
*
Slot0
4. Lines 2 and 4 are scrollable. The choices available on Line 2 are
DLT0, DLT1and Both. Let us assume you want to clean DLT0. Press
the Enter button once to accept DLT0. The
moves to line 4 of the
display. Press the Enter button again to use the cartridge in Slot 0. (If
you cannot to use slot 0 for the cleaning cartridge, scroll to line 4 to
select another slot).
5. The Cleaning Confirmation Screen appears, as shown below.