User`s guide

Chapter 2. Operation
EK–TL891–UG. A01 2–-21
Figure 2-17 Default Screen
A default screen is shown in Figure 2-17. Note that DLT0 is empty, while DLT1
is idle. When a drive is idle, it has a cartridge loaded, and is awaiting
instructions. From the Default Screen, enter the Menu Mode by pressing the
Enter
button. The Main Menu shown in Figure 2-18 appears.
Figure 2-18 Main Menu
The is next to the line that reads ‘Load/Unload.’ Press the
Enter button to
display the first Load/Unload submenu, which is shown in Figure 2-19.
Figure 2-19 Load/Unload Initial Screen
Dlt0: No Tape
Dlt1: Idle
Loader Idle
0 1 _ 4 5 6 7 8 9
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu
From:
DLT1
To:
*Slot3