User`s guide

DLT MiniLibrary (TL891) - User’s Guide
2–20 EK–TL891–UG. A01
Figure 2-16 CompacTape Cartridge
1 - Leader 2 - Write Protect OFF 3 - Write Protect ON
2.9.2 Write Protection
The write protection switch of a CompacTape cartridge is also shown in Figure
2-16. To enable data recording, slide the write protect switch to the right so that
no orange color is visible through the window in the write protect switch (2). To
write protect the CompacTape cartridge, slide the write protect switch to the left
until the orange indicator shows through the window on the write protect switch
(3).
2.9.3 Loading and Unloading Tape Cartridges
The Load/Unload submenus enable you to specify a source and a destination for
a cartridge movement. As a result, you use exactly the same procedure to load
and unload. To load or unload a tape from the front panel of the module, use the
Load/Unload menus as follows.