User`s guide

DLT MiniLibrary (TL891) - User’s Guide
2–18 EK–TL891–UG. A01
2.8.4 Inserting Cartridges Into the Magazine
A full magazine is shown in Figure 2-15. Insert cartridges so that the label end
with the write protect switch is outward, with the write protect switch toward the
bottom of the magazine. After you insert the desired cartridges into the
magazine, position the module so the cartridges protrude to the left, and the
magazine handle is toward you, as shown in Figure 2-15. Insert the magazine
into the Base Module with that orientation.
Figure 2-15 Tape Magazine With Cartridges Installed
2.9 Tape Cartridge Requirements
A single DLT MiniLibrary with its ten-cartridge magazine offers formatted
capacities as shown in Table 2-2. When the TZ89N uses CompacTape III or
IIIXT cartridges, its capacity is limited accordingly.