User`s guide

Chapter 2. Operation
EK–TL891–UG. A01 2–-17
Figure 2-14 Magazine In Place
2.8.2 Emergency Magazine Removal
If a fault occurs that prevents removal of the magazine, turn the power off for
five seconds. Power up while continuously pressing only the
button. Continue
to hold the button until all of the indicators on the control panel light, then go
out. Release the button. The magazine may now be removed without regard to
the position of the Magazine Security Lock.
2.8.3 Inserting a Magazine Into the Base Module
Note that the magazine door on the front of the module is closed and locked
whenever there is no magazine installed. To open it, press the
Unlock/Open
button on the front panel. When the door has opened, slide the magazine through
the door opening, with the cartridges protruding from the left. When the
magazine is fully inserted, the lock mechanism automatically locks the magazine
in place.