User`s guide

Chapter 2. Operation
EK–TL891–UG. A01 2–-15
2.7 Displaying Error Logs
To display the error history of the module, you need to use the Show History
menu. Access it as follows.
1. At the Default Screen press the
Ente
r button to enter the Menu
Mode. The Main Menu is displayed.
2. At the Main Menu, press the
button four times until the in
the display is next to ‘Show History Menu
3. Press the
Enter button to select the submenu.
4. At the Show History Submenu, press the
button once so that
the
in the display is next to ‘Error History.’
5. Press the
Enter button to select the function. A circular list of 4-
line error reports is displayed in the format shown in Figure 2-
13.
Figure 2-13 Error History Screen
6. Using the and buttons, scroll the list to display the error
history of the module.
The second number on the fourth line is the number of entries. The memory can
hold up to 1024 events.
Fault Code: XXXX
Error Description
DD/MMM/YYYY HH:MM:SS
Entry NNNN Of NNNN