User`s guide

Chapter 2. Operation
EK–TL891–UG. A01 2–-11
The items available on the Show Status Menu are:
•
Library
•
DLT0
•
DLT1
•
MAP Info (only if bar code reader is installed).
Move the
up or down with the and buttons, then press the
Enter button
to select the item.
Library Status Submenu
When you select Library, the submenu in Figure 2-10 appears.
Figure 2-10 Library Status Submenu
NOTE
xx.xx represents decimal placeholders for the
current firmware revision level.
This screen is scrollable. The list of Library Status categories available is as
follows:
• Model Number
• Firmware Revision
• Date
• Time
• Loader Status
• Library Mode
• Library Configuration
• Vendor Identification
• Product Identification
• Transport Address
• Storage Address
• Transfer Address
• Serial Number
• Wide SCSI
• SCSI Bus Parity
• SCSI Bus ID
• Negotiation Mode
• Transfer Rate
• Unload Mode
• Reserved Slots
• Mode Page 1F Length
• TUR Reporting
• Init Element Status
• Boot Version
• Flash Type
• Baud Rate
• Barcode Reader
• Label Size
• Label Alignment
Model Number:
DIGITAL TL89x
Firmware Revision:
xx.xx