User`s guide

Chapter 2. Operation
EK–TL891–UG. A01 2–-9
2.4.2 Entering the Menu Mode
NOTE
When you enter the Menu Mode, the
Ready
light
goes out. This means that the module is off-line ,
and all medium changer commands from the host
return a SCSI ‘not ready’ status until you exit the
Menu Mode and the
Ready
light goes on.
When the Default Screen appears on the screen, you can enter the Menu Mode
by pressing the
Enter
button. The Main Menu shown in Figure 2-8 appears.
Figure 2-8 Main Menu
2.4.3 Exiting the Menu Mode
To leave the menu mode and return to the Default Screen, press the
Escape
button repeatedly. Each time you press the
Escape
button, the display moves to a
higher menu level. When the Main Menu is visible, pressing the
Escape
button
once returns to the Default Screen.
NOTE
When you see a
on line 1 or a on line 4 of
the display, this means that some or all of the
display may be scrolled in the indicated direction
to reveal more choices.
Load/Unload
Show Status Menu
Maintenance Menu
Configure Menu