User`s guide

DLT MiniLibrary (TL891) - User’s Guide
2–6 EK–TL891–UG. A01
2.3.3 Default Screen
After the POSTdiagnostics have concluded successfully and initialization is
complete, the default screen appears, as shown in Figure 2-5.
Figure 2-5 Default Screen
The first and second lines of the Default Screen show the status of the tape drive
within the MiniLibrary. The possible status conditions of the drives are
•
No Tape
•
Idle
•
Rewinding
•
Seeking
•
Reading
•
Writing
•
Erasing
•
Cleaning
The third line of the display tells the status of the library robotics. The possible
conditions of the library robotics are:
•
Idle
•
Fetching
•
Stowing
•
Moving
•
Diag Active
•
Diag Complete
•
Taking Inventory
•
Checking Drives
•
Checking Labels
•
Orphaned Cartridge
•
Trapped Cartridge
DLT0 Seeking
DLT1 Idle
Loader Idle
0 1 _ 3 _ 5 6 7 8 9