User`s guide

Appendix E. Product Notes for Sun
EK-TL891-UG. A01 E–7
E.2.1.6 Verification of Password and Connectivity
Verify that the “
passwd
” file was saved to tape using the following
command:
tar tvf /dev/rst4
The system responds with
/etc/passwd
The installation and verification procedure is now complete.
Verify the connectivity of the TL891 MiniLibrary device by typing the
following:
OK>
probe-scsi-all
If the TL891 MiniLibrary is correctly installed, the console will display
a listing which will include the following:
< varied text >
Target 0
Unit 0 Removable Device Type 8 DEC TL800 (c) DEC031427-Jun-97
Target 4
Unit 0 Removable Tape DEC TZ89 (c) DEC183797A002
<varied text>
NOTE:
The actual target-id displayed may
differ depending on the SCSI-id
setting on the device.