User`s guide

Appendix E. Product Notes for Sun
EK-TL891-UG. A01 E–3
ST_VARIABLE = 0x0001
ST_BSF = 0x0008
ST_BSR = 0x0010
ST_LONG_ERASE = 0x0020
ST_KNOWS_EOD = 0x0200
ST_UNLOADABLE = 0x0400
ST_LONG TIMEOUTS = 0x1000
– The fifth parameter (4) defines the number of densities. The
maximum definable number of densities is 4, which is a Sun
Operating System limitation.
NOTE
In our example entry we choose to
use TZ88 native and compressed
modes for the two lower densities
and TZ89 native and compressed
modes for the two higher density
drivers. Because your situation
may demand something other than
these settings, we have included
Table E–1 which lists all other valid
density values. Refer to Table E–1
for other density settings.
– The sixth parameter (
0x82
) is the vendor-unique density code
for the
CT-IV
, 20 GB.
– The seventh parameter (
0x83
) is the vendor-unique density
code for
CT-IV
, 40 GB
compressed
mode.
– The eighth parameter (
0x84
) is the vendor-unique density
code for the
CT-IV
, 35 GB.
– The ninth parameter (
0x85
) is the vendor-unique density
code for the
CT-IV
, 70 GB
compressed
mode.
– The last parameter in the
TZ89-data
parameter is the default
density
3
,
CT-IV
in the 70 GB
compressed
mode.
Where:
CT-IV
= CompacTape IV Data Cartridge