User Guide
Table Of Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
5–42 Maintenance and Service Guide
Removal and Replacement Procedures
11. Lift the front edge of the board assembly 1 until it rests at an
angle (Figure 5-35).
12. Slide the board assembly forward 2 until the rear panel
connectors clear the bottom case.
13. Lift the board assembly straight up 3 to remove it from the
bottom case.
Figure 5-35. Removing the Board Assembly
Reverse the preceding procedures to assemble the docking
station.