User Guide
Table Of Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
5–34 Maintenance and Service Guide
Removal and Replacement Procedures
5.10 Modem Cable
✎
The modem cable is included in the Miscellaneous Cable Kit,
spare part number 310673-001.
Perform the following steps to remove the modem cable:
1. Prepare the tablet PC for disassembly (Section 5.3).
2. Remove the display panel assembly (Section 5.5).
3. Remove the system board (Section 5.8).
4. Position the system board with the fan side facing up and the
heat sink grille facing you.
5. Disconnect the modem cable
1 from the system board
(Figure 5-28).
6. Remove the modem cable 2.
Figure 5-28. Removing the Modem Cable
Reverse the preceding procedures to install the modem cable.