User Guide
Table Of Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
5–22 Maintenance and Service Guide
Removal and Replacement Procedures
6. Release the system board ZIF connector 1 to which the
speaker cable is attached and disconnect the cable
2 from the
system board (Figure 5-18).
7. Remove the tape 3 that secures the speaker cable to the PC
Card assembly.
8. Remove the speaker cable 4.
✎
The speaker cable is included in the Miscellaneous Cable Kit,
spare part number 310673-001.
Figure 5-18. Removing the Speaker Cable
Reverse the preceding procedures to install the speaker assembly.