User Guide
Table Of Contents
- Product Description
- Troubleshooting
- Illustrated Parts Catalog
- Removal and Replacement Preliminaries
- Removal and Replacement Procedures
- Specifications
- Connector Pin Assignments
- Power Cord Set Requirements
- Screw Listing
- Index
Removal and Replacement Procedures
Maintenance and Service Guide 5–17
15. Disconnect the inverter board cable 1 from the inverter board
(Figure 5-13).
16. Release the ZIF connector 2 to which the inverter board
cable is attached and disconnect the cable
3.
17. Remove the tape
4 that secures the inverter board cable to the
back of the display panel.
Figure 5-13. Disconnecting the Display Panel Cables