User manual

Select Disable local Windows key combinations (e.g. ALT+TAB) to disable the passing of hot

keys to the terminal service server.

Select Boot time Num Lock state (On/Off) to enable Num Lock on the client.

LPD Control

The LPD Control dialog box allows you to set the terminal up as a line printer (print server).

To set the terminal up as a print server:

1. Select Enable Printer.

2. Type the Printer Name and Network Port.

3. Select the appropriate printer port from the list. If you select a COM port, you have the option of

configuring the serial port by clicking Configure and typing the appropriate parameters.

4. Select Send Form Feed if form feeds are necessary. Form feeds are primarily used with older

printer technology.

NOTE: Verify the terminal serial port is enabled in BIOS and in the Control Panel Port Lock window.

You must also set up the application server for LPD printing.

Modems

The Modem Settings dialog box allows you to access and modify settings for external modems.

LPD Control