User manual

1. Click Next.
2. Connect a USB flash drive to the unit. The USB flash drive letter and size are displayed. The USB
flash drive must be greater in size than the on-board flash disk.
3. Choose whether you want to capture a full image or system settings. Click Capture.
4. Click Yes on the warning screen. The ThinState Capture tool formats and makes the USB flash
drive bootable. ThinState Capture reboots the system.
5. Follow the on-screen instructions.
You can now use the USB flash drive to deploy the captured image or system settings to another HP thin
client of the exact same model and hardware.
42 Chapter 4 Control Panel