Operating instructions

7
B. Racking a Field-Rackable Array
8. Place the array on the rails and slide
it all the way to the rear. (see
Fig. 16).
WARNING! An empty array
weighs in excess of 60 pounds
(27.2 kg). To avoid serious injury, it
is recommended that two people
lift the array into the rack.
9. Tighten two M5 screws through the
array front mounting ears.
Fig. 16. Sliding the array into HP Rack System/E
10. Place two rail clamps on the rails
and slide them into each rear corner
of the array chassis. (see Fig. 17).
11. Secure the rail clamps with two
10-32 screws.
Fig. 17. Installing enclosure rail clamps in HP Rack System/E