Operating instructions

14
B. Racking a Field-Rackable Array
3. The array and rail kit take 3 units of
space. Using the template provided,
locate the required units of space on
the four rack columns (see Fig. 31).
Fig. 31. Locating units of space in Compaq 9000
4. Holding the right rail in position,
align the notches in the rail tab and
mark the mounting hole on the front
column (see Fig. 32).
Fig. 32. Marking mounting holes in Compaq 9000
5. Insert one end of a locating rod in
the marked hole, and the other end
in the corresponding hole on the rear
column (see Fig. 33).
6. Slide the clips on the rod toward the
ends of the rod.
Fig. 33. Installing locating rods in Compaq 9000